uc180 SERIES

Features
- Rail thickness is just 7.5 mm. Compact overtravel type of slide rail with a focus on slimness. - Both draw-out and closing have a cycle repair (ball creep repair) mechanism, reducing brake-stop (ball stop due to frictional resistance) at start of operation. *Because both inner and outer members are trapped, screw processing for the rail mounting unit is not required. As well, mounting is possible using the rail hole and elongated hole.
Recommended screws
- M2.6 Cross-recessed pan head screw for precision equipment (tap) - M2.3 Cross-recessed pan head screw for precision equipment (hole / elongated hole) [Caution] * Mounting screw length must be within mounting unit thickness + 1.0 mm. (Long screws will contact the ball retainer and impede rail operation or cause damage.) * General pan head screws may contact the ball retainer and impede rail operation or cause damage.
Grease
- Nichimoly G-03031X

*For special size, contact our sales staff
*Changes may be made without notice for improved quality, environment, and safety, without affecting function or mounting
*Manufactured under ISO9001:2015, ISO14001 and OHSAS 18000 certified factory
*Under Japanese supervision with Japanese standard quality